Saturday, August 18, 2012

Rough Rider

Here's a little post of a bit of converting I have been up to.  This is my first Rough Rider of what will be a  squad of 10.  Last month I bought a 10 man Cadian squad and 2 sets of Medieval horses from GW.  I started out by picking the set of legs that was closest to working, then I had to do a lot of cutting and shaving to get them to fit.


Here you can really see all of the material I had to remove.


Then, I had to fill a lot back in with green stuff.  While that was still pliable I started on the torso because I also had to sculpt the hand holding the lance.  I filled in around the neck and all seams on the horse as well.


For the lance tips my brother gave me a bunch of skeleton spears and I took the plainer looking type to use. Much more imposing with a spear tip on there.


Behind the point I added a small box with a light and a wire leading to the point.



That's all on these for now since I do not want to repose and sculpt all of the legs I will be casting copies of this sculpt to use for all of them.  Just ordered some silicon and resin to do so, should have it soon.  I will also make a mold of some of the BFG stuff I have scratched.

Saturday, August 11, 2012

New table, new terrain! [Part 8]

Got some more buildings painted up last week for the table.  Forgot to bring home a piece of foam to use to base the trees,  for the 4th week in a row... Still, the completed terrain collection grows every week and will eventually be complete.  Eventually, maybe not too soon for the list is long.

First up we've got a Cities of Death building which I have painted blue and white.  On the front the graffiti says "Freiberg Resists" with a small aquila above it.  What is the city resisting?  Why the enemies of the Emperor of course.


Here's a shot of the inside, there are a few small craters and bits of debris in there.


Next up is another Pegasus building.  This one has got a door and a complete first floor.  The writing is telling you to stay out because of the plague zombies.  Nurgle has visited our fair city.


Here's a shot of the other side and most of the interior.  A little bit of debris inside and there is a pot belly stove hidden by the wall.  There is also writing on the outside wall that says "All is lost."  Not everyone thinks the city is doing a good job of resisting anything.



Well, that is it for now.  I have received an order of medieval  horses from GW and have begun to construct my rough riders.  It's going to be rather time consuming to reconstruct all of the legs for each rider from the Cadian plastics.  I may just buy some casting stuff at last.

Stay tuned.

Saturday, August 4, 2012

Leman Russ: Judgement

Just finished painting the lead tank for my Armor Company and Armor Squadron 1.  The tank is called Judgement and it is commanded by Commissar Constantin Braun.  As this is a command tank it has some upgraded sensors and equipment, since it's the company leader I also gave it the GW command upgrade auspex/comms package.  Went about painting this tank in much the same way as my last Leman Russ Tough Bastard and every piece of armor since then.  A simple grey base followed by scratching, damage, and weathering.  It has the commander stripe with the roman numeral I for the squadron number.  Since it's commanded by a commissar it's also got the red and black stripe design on the side.

Here's a front view of the tank, there is a small medallion on the lower left and the name is below the turret on the flat of the hull.



The commander is the Forge World model and is a very nice sculpt.  He took some time to paint as there are a fair number of details to him.  In this picture you can see that I made the heavy stubber as a coaxial weapon as seen on many of the FW turrets.  I made that with a few small brass tubes.


I put about how much stowage as I usually do and of course my ridiculous whip antennas.  There are also purity seals and the like denoting the honors of the vehicle and strength of its machine spirit.  I did not add any mottos to this tank as it's got a commissar as a commander.  So, the only writing I have done is the name and the kill tally on the barrel.  It's a pretty high tally as this guy is supposed to be a company commander and should be pretty good at his job.  I will perhaps use him as Knight Commander Pask from time to time.

I generally apply much more pigment to the bottom of the hull than to to upper portion.  I will have it so that it rests on the edges of the track axel mounts and then lightly brush it up from there to slightly powder the top of the hull as well.  The top of the tank and turret get a little more in spots and streaks.  Where there are bullet marks and hit damage I add some black pigment.  I also add powder residue to the muzzle break because it looks cooler that way even though it's not all to realistic.  I use mig productions pigments, but you can use any brand you like.  I still have the same jars I bought in 2009 and will have them for several more years before they are gone.  They are ground extremely fine and cover and stay adhered very well, even with wargaming use.  I cannot speak for other brands as I have never used them, but Mig get my support.


Finally, a shot of 1st and 2nd squadron lead tanks together. Can't wait to have all 3 squadrons painted up.  3rd squadron will feature the Destroyer Tank Hunter as leader with 2 FW turret Vanquishers to form a tank hunting squadron.  1st and 2nd Squadrons are a mix of the new and old Battle Tank and Demolisher Kits a few of which have several main gun options modeled.  I can field at least 1 of any variant.



That's it for now, not sure what I am going to be working on next, I am currently waiting on some horses to use to make Rough Riders.  I may begin that project next week.  Comments and critique are appreciated, thanks for stopping by.